[−][src]Struct curve25519_dalek::edwards::CompressedEdwardsY  
In "Edwards y" / "Ed25519" format, the curve point \((x,y)\) is determined by the \(y\)-coordinate and the sign of \(x\).
The first 255 bits of a CompressedEdwardsY represent the
\(y\)-coordinate.  The high bit of the 32nd byte gives the sign of \(x\).
Methods
impl CompressedEdwardsY[src]
pub fn as_bytes(&self) -> &[u8; 32][src]
View this CompressedEdwardsY as an array of bytes.
pub fn to_bytes(&self) -> [u8; 32][src]
Copy this CompressedEdwardsY to an array of bytes.
pub fn decompress(&self) -> Option<EdwardsPoint>[src]
Attempt to decompress to an EdwardsPoint.
Returns None if the input is not the \(y\)-coordinate of a
curve point.
impl CompressedEdwardsY[src]
pub fn from_slice(bytes: &[u8]) -> CompressedEdwardsY[src]
Construct a CompressedEdwardsY from a slice of bytes.
Panics
If the input bytes slice does not have a length of 32.
Trait Implementations
impl Clone for CompressedEdwardsY[src]
fn clone(&self) -> CompressedEdwardsY[src]
fn clone_from(&mut self, source: &Self)1.0.0[src]
impl ConstantTimeEq for CompressedEdwardsY[src]
fn ct_eq(&self, other: &CompressedEdwardsY) -> Choice[src]
impl Copy for CompressedEdwardsY[src]
impl Debug for CompressedEdwardsY[src]
impl Default for CompressedEdwardsY[src]
fn default() -> CompressedEdwardsY[src]
impl Eq for CompressedEdwardsY[src]
fn assert_receiver_is_total_eq(&self)[src]
impl Identity for CompressedEdwardsY[src]
fn identity() -> CompressedEdwardsY[src]
impl PartialEq<CompressedEdwardsY> for CompressedEdwardsY[src]
fn eq(&self, other: &CompressedEdwardsY) -> bool[src]
fn ne(&self, other: &CompressedEdwardsY) -> bool[src]
impl StructuralEq for CompressedEdwardsY[src]
impl StructuralPartialEq for CompressedEdwardsY[src]
Auto Trait Implementations
impl RefUnwindSafe for CompressedEdwardsY
impl Send for CompressedEdwardsY
impl Sync for CompressedEdwardsY
impl Unpin for CompressedEdwardsY
impl UnwindSafe for CompressedEdwardsY
Blanket Implementations
impl<T> Any for T where
    T: 'static + ?Sized, [src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
    T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
    T: ?Sized, [src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T[src]
impl<T, U> Cast<U> for T where
    U: FromCast<T>, 
U: FromCast<T>,
fn cast(self) -> U
impl<T> From<T> for T[src]
impl<T> FromBits<T> for T
fn from_bits(t: T) -> T
impl<T> FromCast<T> for T
fn from_cast(t: T) -> T
impl<T, U> Into<U> for T where
    U: From<T>, [src]
U: From<T>,
impl<T, U> IntoBits<U> for T where
    U: FromBits<T>, 
U: FromBits<T>,
fn into_bits(self) -> U
impl<T> IsIdentity for T where
    T: ConstantTimeEq + Identity, [src]
T: ConstantTimeEq + Identity,
fn is_identity(&Self) -> bool[src]
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T> ToOwned for T where
    T: Clone, [src]
T: Clone,
type Owned = T
The resulting type after obtaining ownership.
fn to_owned(&self) -> T[src]
fn clone_into(&self, target: &mut T)[src]
impl<T, U> TryFrom<U> for T where
    U: Into<T>, [src]
U: Into<T>,
type Error = !
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, [src]
U: TryFrom<T>,